Usage Areas
- Unpaved roads, paved roads, airstrip, drainage blankets under road fillings;
- Capillarity blankets, asphalt/concrete reinforcement layers, railways;
- Road toppings;
- Sports fields;
- Under isolation materials;
- Construction of flexible structures and storage basins for such materials as cement, sand, etc.;
- Drainage systems;
- Drainage of the upper part of earth-dam;
- Drainage section for accumulation of water leaking at earth-dam;
- Filter around drainage surface of dams;
- Under rip rap at earth-dams and in clay core source estuaries;
- Under shore protection materials;
- Between floor and channel revetment;
- Filter under kick plate;
- Preventing drift of silt, sand, etc. under foundations by water in areas with raised groundwater line;
- Keeping the dirt, silt, sand, etc. in the water (river water canal, water tank, water treatment plant, pool);
- Keeping the waste and leftover materials (factory, river, sewerage, chimney, cesspit);
- Dams, shoreline arrangements, and earth-fills ( prevention of the hydraulic pressure and erosion).
Geotextile Functions
Separation:
Geosynthetics separates the two different soil layers from one another and prevents intermingle.
Filtration:
Geosynthetics provide a sufficient amount of water flow by holding slim particles. In order to materialize filter function as desired, high-permeable and suitable geotextile should be used.
Strengthening:
Geosynthetics increase the load carrying capacity of soil/geotextile system. To achieve this, geotextile should be resisting and have good drainage properties, as well as having a high friction between the geotextile and soil properties.
Drainage:
With the drainage function, the flow of water on the ground is provided within the geotextile plane. In order to fulfill this function, geotextiles must have a bulky structure and sufficient thickness.
Insulation:
Geosynthetics serves for insulation by providing impermeability. By using geotextile together with a bonding layer, absorption of the respective material is provided; thus a water resistant layer is obtained.
Protection:
With the protection function, synthetic waterproof membranes are preserved from external factors. In order to process the protection function properly, geotextile must have a tight and bulky structure.
Product Range
We have 3 different product types depending on the type of raw material used:
- Polypropylene (White)
- Original polyester (White, Black, Gray)
- Recycle polyester (White, Multicolour)
We have 7 different standard product types depending on the areal weight and special orders are possible in different weights. Our standard products are:
- 150 gr/m2
- 200 gr/m2
- 250 gr/m2
- 300 gr/m2
- 400 gr/m2
- 500 gr/m2
- 600 gr/m2
In addition, it is possible to apply heat treatment to the products depending on customer needs. Thanks to this process, product strength is increased while product thinning is ensured and transportation costs are reduced.